Introducing:
"Johny Flood-Stopper" TM
A simple, easy to install
Rapid Shut-off Conversion Kit -- for tank-type Toilets.
Introducing:
"Johny
Flood-Stopper" TM
A
simple, easy to install
Rapid
Shut-off Conversion Kit
-- for tank-type
Toilets.
|
The
kit: |
|
It's that easy! |
|---|
Most
of us are all too familiar with this problem
Should
a clog occur, water can flood the bowl and eventually spill over onto
the floor. It seems there are very few products that address this
problem. Most solutions are expensive, hard to install, and they
totally overlook the most common cause of toilet overflows. This most
common situation, typically occurring only after a user initiates the
normal flush cycle.
Unlike most other solutions, this product
is available as a low cost, easy to install upgrade kit, that is
compatible with most preexisting tank-type toilets. Operation is
simple and intuitive -- similar in function to a common light switch.
This
system doesn't use batteries or electricity, never needs to be reset,
and there or no unfamiliar controls that need concern the user. It
requires no regular maintenance beyond that of a traditional
flush-valve system; and since it is all mechanical, it cannot be
affected by power outages or battery failure.
Easy
and Intuitive, manual operation
To operate, the user applies downward pressure to the flush handle, which initiates a normal flush cycle (same as usual). However, if the user raises the handle while a flush is still in progress, the special bidirectional linkage (included in this kit) will immediately close the flush-valve, Ending that disgusting overflow Dead in its tracks!
Users benefit from a system that
is highly intuitive, and as easy to work as a common light switch.
Owners benefit from a system that is both low maintenance and low
cost. Installers benefit from a kit that is simple, and easy to
install.
This
product has many advantages, such as:
Easy "Do-It-Yourself" Installation.
It's as easy to work, as a common light switch.
It can be easily and reliably retrofitted to most tank-type toilets.
It can stop the overflow of water, even in the event of a blockage in the main drain.
It does not alter the external geometry of a traditional toilet.
It does not introduce any unfamiliar controls (i.e. additional switches, levers, etc.), that need concern the user.
It does not require any added power source (e.g. electricity).
It's simple, reliable, and low cost.
It's adjustable. The flush-cycle can be either shortened to save water, or extended for a more thorough flush.
This simple innovative design, actually Improves the overall performance of a common tank-type toilet!
Patent
Pending
U.S. Patent pending. This product is a
Ferris Innovations exclusive, and is not available from any other
source.
Q&A
Q: How do I know if this thing will work on my toilet?
A:
Remove the lid and look
inside. This product is designed to fit most traditional toilets,
such as the two shown below.
|
|
|
|
Q:
Can I install it
myself?
A: Installation is easy. Click here to see the Installation Guide.
|
A:
Yes. It only takes seconds to convert this to a
conventional flapper system; |
More
Questions?
|
|
Flood-Stopper
Essentials (Contractor kit) -- Only
$5.99
